dl-breadcrumbs__homedl-breadcrumb-item__separatorHardware descriptionsdl-breadcrumb-item__separatorDevice specificationsdl-breadcrumb-item__separatorProcessor modulesdl-breadcrumb-item__separator...dl-breadcrumb-item__separatorAC500-eCodl-breadcrumb-item__separatorOnboard I/Os in processor module PM50x2dl-breadcrumb-item__separatorTechnical datadl-breadcrumb-item__separatorTechnical data of the PTO outputs
dl-pagination__prev-inactivedl-pagination__prev-activedl-pagination__next-inactivedl-pagination__next-active
Technical data of the PTO outputsdl-permalink__symbolPermalink

Parameter

PM5012-T-ETH

PM5012-R-ETH

PM5032-T-ETH

PM5052-T-ETH

PM5072-T-2ETH(W)

PM5082-T-2ETH

PM5092-T-2ETH

PM5032-R-ETH

PM5052-R-ETH

PTO

Useable outputs

-

-

4

1

pair of output

Fast output,

max. up to 200 kHz 2)

-

-

O4 … O7

For 2 PTO 200 kHz 1) Pulse/Direction or CC/Ccw modes as pair of outputs

C12 … C13

O4 … O7

as 4 PTO up to 200 kHz Pulse outputs / Direction using fast output 5kHz O0...O3 2)

1) If the load is less than 100 mA it is strongly recommended to connect an additional load resistor (240 Ω/5 W or 270 Ω/5 W) to the output to improve the pulse signal.

2) With the processor modules revision 1 (rubric R017x), the fast output provides then 200 kHz PTO Pulse output instead of 100 kHz. The processor modules revision 1 needs at least AB 2.6.0 and higher.