PAC_AccumulatorSimulation (FB)

FUNCTION_BLOCK PAC_AccumulatorSimulation

This function block is implemented to simulate the movement of an accumulator.

Note

This function block must be called in the POU which is executing in the MotionSolution_Task.

InOut:

Scope	Name	Type	Initial	Comment
Input	Enable	BOOL	FALSE	Enable the function block
	Extrusion	BOOL	FALSE	True to perform the extrusion action
	Filling	BOOL	FALSE	True to perform the filling action
	Speed	LREAL	1.0	[mm/s] The speed of the movement for simulation, range: > 0
	FullAtStart	BOOL	FALSE	True, the accumulator is full when the function block starts
Output	Valid	BOOL		Indicates that the outputs are valid
	Busy	BOOL		Indicates that the function block is runnig
	Error	BOOL		Signals that error has occurred within function block
	AppErrorID	ERROR_ID		Error identification. For error details refer to Enumeration ERROR_ID
	ActualValue	LREAL		The simulated actual value to show the actual state of the accumulator
	ActualPosition	LREAL		[mm] The simulated actual position of the accumulator
	Empty	BOOL		Indcates that the accumulator is empty
	Full	BOOL		Indicates that the accumulator is full
Inout	MoldingParameter	PAC_MoldingParameter		Reference to the molding parameter