dl-breadcrumbs__homedl-breadcrumb-item__separatorAC500-S safety PLCdl-breadcrumb-item__separatorSafety user manual V1.3.2dl-breadcrumb-item__separator...dl-breadcrumb-item__separatorConfiguration and programmingdl-breadcrumb-item__separatorOverviewdl-breadcrumb-item__separatorSafety engineering
dl-pagination__prev-inactivedl-pagination__prev-activedl-pagination__next-inactivedl-pagination__next-active
Safety engineeringdl-permalink__symbolPermalink

This is the web edition of the original ‎⮫ AC500-S safety user manual, version 1.3.2. This web edition is provided for quick reference only. The original safety user manual must be used to meet functional safety application requirements.

You can easily check your installed and licensed safety engineering version and its safety components. This function is available as of Automation Builder 2.3.0.

Automation Builder is open.

  1. Go to menu “Help  About  Safety Version Information”.

    Fig. 494: Information on safety engineering and safety components
    Safety_Version_Information

If a safety engineering version and the safety components versions are shown, this ensures that you use released and assessed safety components.

The safety components are released independently from Automation Builder releases. After installation of Automation Builder 2.3.0 or higher, the user has to check the safety engineering version⮫ “Workflow”.

NOTICE

NOTICE
NOTICE
NOTICE

NOTICE

NOTICE

If no safety engineering and no safety components are shown, redo the Automation Builder installation once again and make sure you have activated the appropriate license. If the error persists, contact ABB technical support.