dl-breadcrumbs__homedl-breadcrumb-item__separatorConfiguration and programmingdl-breadcrumb-item__separatorConfiguration in Automation Builderdl-breadcrumb-item__separator...dl-breadcrumb-item__separatorGeneral settingsdl-breadcrumb-item__separatorFirmware identification and updatedl-breadcrumb-item__separatorUpdate CI52x-Modbus firmwaredl-breadcrumb-item__separatorFirmware update procedure
dl-pagination__prev-inactivedl-pagination__prev-activedl-pagination__next-inactivedl-pagination__next-active
Firmware update proceduredl-permalink__symbolPermalink

  1. In the IP Configuration Tool click “Scan” to initialize a device scan.

  2. From the list select the CI52x-MODTCP device(s) which shall be updated and click “FW Update”.

  3. Select the firmware update file (e.g. AC500_CI52x_Firmware_V3.2.8.bin) to initialize a signature check and start the update procedure.

    During the firmware update the operation of the device(s) is stopped. After the update, all outputs are set to zero.

  4. After the update, click “Scan” again to retrieve the firmware version of the device.