dl-breadcrumbs__homedl-breadcrumb-item__separatorGetting started with example projectsdl-breadcrumb-item__separator...dl-breadcrumb-item__separatorHardwaredl-breadcrumb-item__separatorConfiguration for example projects
dl-pagination__prev-inactivedl-pagination__prev-activedl-pagination__next-inactivedl-pagination__next-active
Configuration for example projectsdl-permalink__symbolPermalink

The example projects require a small PLC configuration with I/O devices, e.g., as available in the training case ‎⮫ TA5450-CASE.

Table 1: Modules for the example projects to get started with the AC500 PLC

Product name

Type

First project⮫ “Example project for central I/O expansion”

Second project⮫ “Example project for remote I/O expansion with PROFINET”

PM5630- 2ETH

processor module

x

x

TB5620-2ETH

terminal base for processor module

x

x

DA501

analog/digital mixed input/output (I/O) module

x

x

TU516-H

terminal unit for I/O module

x

x

CM579-PNIO

PROFINET communication module

--

x

CI502-PNIO

PROFINET communication interface module

--

x

TU508-ETH

terminal unit for communication interface module

--

x

TA524

blind cap for terminal base

x

x

Connections

Fig. 3: Training case TA5450
training_case_TA5450_electrical_connection01

In the training case, the control panel CP6607 is included. A control panel is not needed for the example projects.

For testing the example project some inputs require to be connected as follows:

Fig. 4: Wiring of training case
training_case_TA5450_electrical_connection02

For the example projects, not all input switches and none of the potentiometers included in training case are necessary.

You will need switch I1 for the example project for central I/O expansion.

You will need switch I5 for the example project for remote I/O expansion.