dl-breadcrumbs__homedl-breadcrumb-item__separatorConfiguration and programmingdl-breadcrumb-item__separatorConfiguration in Automation Builderdl-breadcrumb-item__separatorPLC devices and componentsdl-breadcrumb-item__separator...dl-breadcrumb-item__separatorCAN onboarddl-breadcrumb-item__separatorJ1939 dl-breadcrumb-item__separatorConfiguration dl-breadcrumb-item__separatorTab: J1939-ECU – TX Signals
dl-pagination__prev-inactivedl-pagination__prev-activedl-pagination__next-inactivedl-pagination__next-active
Tab: J1939-ECU – TX Signals dl-permalink__symbolPermalink

This dialog shows the parameter groups that are transmitted to all other ECUs (broadcast) or to a specific ECU (P2P). In this dialog, you can activate and deactivate individual groups and modify their parameters. You can also add new groups or signals to the list.

“Activate”

_cds_icon_option_activated_copy.png: The parameter group is transmitted.

_cds_icon_option_deactivated.png: The parameter group is not transmitted for a local device. For a remote device, the PLC does not process this group.

“Type”

  • “Broadcast”: The parameter group is transmitted to all ECUs.

  • “Peer-to-Peer P2P”: The parameter group is transmitted to a specific ECU.

“Add PG”

Opens“Add Parameter Group” dialog

“Add Signal”

Opens the “Add Signal” dialog. The button is enabled only if you have selected a parameter group.

  • Parameter group properties
  • Signal parameters