SgxParameterRead (FB)

FUNCTION_BLOCK SgxParameterRead EXTENDS AbbLConC3

SgxParameterRead function block is utilized to read the internal parameter of sensor from either RAM or EEPROM

“ParameterID” represents the byte offset from the base address to the parameter block to be accessed

“Eeprom” is selectable between temporary storage and non-volatile data retention

A new read cycle is initiated by the rising edge of “Execute” signal

InOut:

Scope	Name	Type	Initial	Comment	Inherited from
Input	Enable	BOOL	FALSE	A rising edge (Enable = TRUE) starts the operation, the output Busy goes to TRUE. All other inputs are read and considered continuously. Execution will continue forever until a falling edge (Enable = FALSE) aborts the operation. During Aborting the Busy is still TRUE. Afterward all outputs are reset.	AbbLConC3
Output	Busy	BOOL	FALSE	Operation is running (while output Error is FALSE)	AbbLConC3
	Error	BOOL	FALSE	Operation is stopped with error (while output Busy is FALSE). This output is TRUE for at least one cycle or until Enable is set to FALSE. The output ErrorID gives more details about the error.	AbbLConC3
Input	Set	BOOL	FALSE	A rising edge starts a single operation of parameter read
	ChannelInputBase	POINTER TO ARRAY [0..3] OF WORD		Base address of strain gauge channel, mapped address of state
	ChannelOutputBase	POINTER TO ARRAY [0..3] OF WORD		Base address of strain gauge channel, mapped address of command
	Eeprom	BOOL	FALSE	TRUE => read parameter data from data flash memory, FALSE => read parameter data from RAM
	DigitalOutput	BOOL	FALSE	Imaged digital output field when “general digital output” is configured
	ParameterID	WORD	0	Index number or address of parameter block
Output	CarryOut	BOOL	FALSE	0 => parameter read in progress; 1 => parameter read is carried out
	ErrorID	ERROR_ID	ERROR_ID.NO_ERROR	Error code returned
	StateReturn	WORD	0	State of parameter read cycle returned, [0] => digital output state;[1] => DONE; [8] => fixed 0; [11] => EEPROM; [12:15] => fixed function code = 3
	ParameterIDReturn	WORD	0	Parameter ID returned
	ParameterDataReturn	SgxParameterData		Parameter data returned