SgxParameterRW (FB)

FUNCTION_BLOCK SgxParameterRW EXTENDS AbbLConC3

SgxParameterWrite function block is employed to read or write the internal parameter from either RAM or EEPROM

“ParameterID” represents the byte offset from the base address to the parameter block to be accessed

“Eeprom” is selectable between temporary storage and non-volatile data retention

A new read/write cycle is initiated by the rising edge of “Execute” signal

InOut:

Scope	Name	Type	Initial	Comment	Inherited from
Input	Enable	BOOL	FALSE	A rising edge (Enable = TRUE) starts the operation, the output Busy goes to TRUE. All other inputs are read and considered continuously. Execution will continue forever until a falling edge (Enable = FALSE) aborts the operation. During Aborting the Busy is still TRUE. Afterward all outputs are reset.	AbbLConC3
Output	Busy	BOOL	FALSE	Operation is running (while output Error is FALSE)	AbbLConC3
	Error	BOOL	FALSE	Operation is stopped with error (while output Busy is FALSE). This output is TRUE for at least one cycle or until Enable is set to FALSE. The output ErrorID gives more details about the error.	AbbLConC3
Input	Set	BOOL	FALSE	A rising edge starts a single operation of parameter read or write
	ChannelInputBase	POINTER TO ARRAY [0..3] OF WORD		Base address of strain gauge channel, mapped address of state
	ChannelOutputBase	POINTER TO ARRAY [0..3] OF WORD		Base address of strain gauge channel, mapped address of command
	Eeprom	BOOL	FALSE	TRUE => read/write parameter data from/into both data RAM and flash memory, FALSE => read/write parameter data from/into RAM only
	ReadWriteSelection	BOOL	FALSE	FALSE => READ; TRUE => WRITE
	DigitalOutput	BOOL	FALSE	Imaged digital output field when “general digital output” is configured
	ParameterID	WORD	0	Index number or address of parameter block
	ParameterData	SgxParameterData		Parameter data to be writen to strain gauge channel, valid to “parameter write” only
Output	CarryOut	BOOL	FALSE	0 => parameter read or write in progress; 1 => parameter read or write is carried out
	ErrorID	ERROR_ID	ERROR_ID.NO_ERROR	TURE => Error code returned
	StateReturn	WORD	0	State of parameter read cycle returned, [0] => digital output state;[1] => DONE; [8] => ReadWriteSelection; [11] => EEPROM; [12:15] => fixed function code = 3
	ParameterIDReturn	WORD	0	Parameter ID returned
	ParameterDataReturn	SgxParameterData		Parameter data returned