dl-breadcrumbs__homedl-breadcrumb-item__separatorConfiguration and programmingdl-breadcrumb-item__separatorProgramming with CODESYSdl-breadcrumb-item__separator...dl-breadcrumb-item__separatorCODESYS Visualizationdl-breadcrumb-item__separatorReference, Programmingdl-breadcrumb-item__separatorVisualization Elementsdl-breadcrumb-item__separatorVisualization Element 'Rectangle', 'Rounded Rectangle', 'Ellipse'
dl-pagination__prev-inactivedl-pagination__prev-activedl-pagination__next-inactivedl-pagination__next-active
Visualization Element 'Rectangle', 'Rounded Rectangle', 'Ellipse'dl-permalink__symbolPermalink

Symbol:

_visu_img_rectangle

Category: “Basic”

The “Rectangle”, “Rounded Rectangle”, and “Ellipse” are the same type of element. They can be converted into another element type by changing the “Element type” property.

Element properties

“Element name”

Optional

Example: ‎Werkstueck_3‎

Hint: Assign individual names for elements so that they are found faster in the element list.

“Type of element”

“Rectangle”, “Rounded Rectangle”, “Ellipse”

Element property 'Position'

The position defines the location and size of the element in the visualization window. This is based on the Cartesian coordinate system. The origin is located at the upper left corner of the window. The positive horizontal x-axis runs to the right. The positive vertical y-axis runs downwards.

“X”

The x-coordinate of the upper left corner of the element

Specified in pixels

Example: ‎10‎

“Y”

The y-coordinate of the upper left corner of the element

Specified in pixels

Example: ‎10‎

“Width”

Specified in pixels

Example: ‎150‎

“Height”

Specified in pixels

Example: ‎30‎

Tip: You can change the values in “X”, “Y”, “Width”, and “Height” by dragging the corresponding symbols _visu_icon_position_element to another position in the editor.

“Angle”

Static angle of rotation (in degrees)

Example: ‎35‎

The element is displayed rotated in the editor. The point of rotation is the center of the element. A positive value rotates clockwise.

Tip: You can change the value in the editor by focusing the element to the handle. When the cursor is displayed as a rotating arrow _visu_icon_rotate_statically, you can rotate the element about its center as a handle.

_visu_img_selected_rectangle_with_handle

(1): Handle

Note: If a dynamic angle of rotation is also configured in the property “Absolute movement  Internal rotation”, then the static and dynamic angles of rotation are added in runtime mode. The static angle of rotation acts as an offset.

Radius setting

Visible only when “Rounded Rectangle” is selected in the “Type of element” property.

“Radius”

Rounding of the corners.

“From style”

“Relative to the element size”

“Explicit”: Allows for specifying a custom value in the “Value” setting.

“Value”

Radius of the rounded corners (in pixels)

Example: ‎5‎

Requirement: “Explicit” is selected in the “Radius” setting.

Element property 'Center'

The properties contain fixed values for the coordinates of the point of rotation. This point of rotation is shown as the _visu_icon_center_point.png symbol. The point is used as the center for rotating and scaling.

“X”

X-coordinate of the point of rotation

“Y”

Y-coordinate of the point of rotation

You can also change the values by dragging the symbols (_visu_icon_center_point.png) to other positions in the editor.

Element property 'Colors'

“Normal state”

The normal state is in effect if the variable in “Color variables  Toggle color” is not defined or it has the value ‎FALSE‎.

“Frame color”

Frame and fill color for the corresponding state of the variable.

“Fill color”

“Transparency”

Transparency value (0 to 255) for defining the transparency of the selected color.

Example: 255: The color is opaque. 0: The color is completely transparent.

“Alarm state”

The alarm state is in effect if the variable in “Color variables  Toggle color” has the value ‎TRUE‎.

“Use gradient color”

_cds_icon_option_activated: The element is displayed with a gradient of two colors.

“Gradient setting”

The “Gradient editor” dialog box opens.

Element property 'Appearance'

The properties contain fixed values for setting the look of the element.

“Line width”

Value in pixels

Example: ‎2‎

Note: The values ‎0‎ and ‎1‎ both result in a line weight of 1 pixel. If no line should be displayed, then the “Line style” property must be set to the option “Invisible”.

“Fill attributes”

The way in which the element is filled.

  • “Filled”:The element is filled with the color from property “Colors  Fill color”.

  • “Invisible”: The fill color is invisible.

“Line style”

Type of line representation

  • “Solid”

  • “Dashes”

  • “Dots”

  • “Dash Dot”

  • “Dash Dot Dot”

  • “not visible”

You can assign variables in the “Appearance variables” property for controlling the appearance dynamically. The fixed values here are overwritten.

Element property 'Texts'

The properties contains character strings for labeling the element. The character string can also contain a placeholder with a format definition. In runtime mode, the placeholder is replaced by the current value in the specified format.

CODESYS accepts the specified texts automatically into the “GlobalTextList” text list. Therefore, these texts can be localized.

“Text”

Character string (without single straight quotation marks) for the labeling the element. Add a line break by pressing the keyboard shortcut [Ctrl] + [Enter].

Example: ‎Accesses: %i‎

The variable that contains the current value for the placeholder is specified in the property “Text variable  Text”.

“Tooltip”

Character string (without single straight quotation marks) that is displayed as the tooltip of an element.

Example: ‎Number of valid accesses‎.

The variable that contains the current value for the placeholder is specified in the property “Text variable  Tooltip”.

Element property 'Text properties'

The properties contain fixed values for the text properties.

“Horizontal alignment”

Horizontal alignment of the text within the element.

“Vertical alignment”

Vertical alignment of the text within the element.

“Text format”

Definition for displaying texts that are too long

  • “Default”: The long text is truncated.

  • “Line break”: The text is split into parts.

  • “Ellipsis”: The visible text ends with "..." indicating that it is not complete.

“Font”

Example: “Default”

_cds_icon_three_dots: The “Font” dialog box opens.

_cds_icon_arrow_down: Drop-down list with style fonts.

“Font color”

Example: “Black”

_cds_icon_three_dots: The “Color” dialog box opens.

_cds_icon_arrow_down: Drop-down list with style colors.

“Transparency”

Whole number (value range from ‎0‎ to ‎255‎). This determines the transparency of the respective color.

Example: ‎255‎: The color is opaque.

‎0‎: The color is completely transparent.

Please note: If the color is a style color and already has a transparency value, then this property is write-protected.

Element property 'Absolute movement'

The properties contain IEC variables for controlling the position of the element dynamically. The reference point is the upper left corner of the element. In runtime mode, the entire element is moved.

“Movement”

“X”

Variable (numeric data type). Defines the X position (in pixels).

Example: ‎PLC_PRG.iPos_X‎.

Increasing this value in runtime mode moves the element to the right.

“Y”

Variable (numeric data type). Defines the Y position (in pixels).

Example: ‎PLC_PRG.iPos_Y‎.

Increasing this value in runtime mode moves the element downwards.

“Rotation”

Variable (numeric data type). Defines the angle of rotation (in degrees).

Example: ‎PLC_PRG.iAngle1‎.

The midpoint of the element rotates at the “Center” point. This rotation point is shown as the _visu_icon_center_point.png symbol.

In runtime mode, the alignment of the element remains the same with respect to the coordinate system of the visualization. Increasing the value rotates the element to the right.

 _visu_img_prp_rotation

“Scaling”

Variable (integer data type). Causes centric stretching.

Example: ‎PLC_PRG.iScaling‎.

The reference point is the “Center” property.

The value ‎1‎ shrinks the element by a factor of ‎0.001‎. The value ‎1000‎ returns the element to its original size.

“Interior rotation”

Variable (numeric data type). Defines the angle of rotation (in degrees).

Example: ‎PLC_PRG.iAngle2‎.

In runtime mode, the element rotates about the point of rotation specified in “Center” according to the value of the variable. In addition, the alignment of the element rotates according to the coordinate system of the visualization. Increasing the value in the code rotates clockwise.

The rotation point is shown as the _visu_icon_center_point.png symbol.

Note: If a static angle of rotation is specified in the property “Position  Angle”, then the static angle of rotation is added to the variable angle of rotation (offset) when the visualization is executed.

 _visu_img_prp_inner_rotation

“Use REAL values”

Note: Only available if the device supports the use of REAL coordinates.

_cds_icon_option_activated: The properties of the absolute movement are interpreted as REAL values. The values are not rounded.

The option allows for the individual fine-tuning of drawing the element, for example for the visualization of a smoother rotation.

Hint: If a horizontal or vertical line is drawn blurry on a specific visualization platform, then this can be corrected by an offset of 0.5px in the direction of the line thickness.

You can link the variables to a unit conversion.

The properties “X”, “Y”, “Rotation”, and “Interior rotation” are supported by the "Client Animation" functionality.

See also

Element property 'Relative movement'

The properties contains variables for moving the element. The reference point is the position of the element (“Position” property). The shape of the element can change.

“Movement top-left”

“X”

Variable (integer data type). It contains the number (in pixels) that the left edge is moved horizontally. Incrementing the value moves the element to the right.

Example: ‎PLC_PRG.iDeltaX‎

“Y”

Variable (integer data type). It contains the number (in pixels) that the top edge is moved vertically. Incrementing the value moves the element to the down.

Example: ‎PLC_PRG.iDeltaY‎

“Movement bottom-right”

“X”

Variable (integer data type). It contains the number (in pixels) that the right edge is moved horizontally. Incrementing the value moves the element to the right.

Example: ‎PLC_PRG.iDeltaWidth‎

“Y”

Variable (integer data type). It contains the number (in pixels) that the bottom edge is moved vertically. Incrementing the value moves the element to the down.

Example: ‎PLC_PRG.iDeltaHeight‎

Element property 'Text variables'

These properties are variables with contents that replace a format definition.

“Text variable”

Variable (data type compliant with the format definition). It contains what is printed instead of the format definition.

Example: ‎PLC_PRG.iAccesses‎

Note: The format definition is part of the text in the property “Texts  Text”.

Note: If you specify a variable of type enumeration with text list support, then the name of the enumeration data type is added automatically in angle brackets after the variable name. Example: ‎PLC_PRG.enVar <enumeration name>‎. Then the symbolic value of the enumeration component is printed instead of the numeric value when text is printed. Refer to the help page for the enumerations.

“Tooltip variable”

Variable (data type compliant with the format definition). It contains what is printed instead of the format definition.

Example: ‎PLC_PRG.iAccessesInTooltip‎

Note: The format definition is part of the text in the property “Texts  Tooltip”.

Element property 'Dynamic texts'

Dynamic texts are variably indexed texts of a text list. At runtime, the text is displayed that is currently indexed in the variable.

“Text list”

Variable (string) or name of the text list as a fixed string in single straight quotation marks.

Example: ‎'Errorlist'‎

_cds_icon_arrow_down: Drop-down list with the dialogs available in the text lists.

“Text index”

Text list ID. This refers to the desired output text.

  • As fixed string with the ID in single straight quotation marks.

    Example: ‎'1'‎

  • As a variable (‎STRING‎) for dynamically controlling the text output.

    Example: ‎strTextID‎

    Sample assignment: ‎PLC_PRG.strTextID := '1';‎

“Tooltip index”

Text list ID. This refers to the desired output text.

  • As fixed string with the ID in single straight quotation marks.

    Example: ‎'2'‎

  • As a variable (‎STRING‎) for dynamically controlling the text output.

    Example: ‎strToolTipID‎

    Sample assignment: ‎PLC_PRG.strToolTipID := '2';‎

Element property 'Font variables'

The variables allow for dynamic control of the text display.

“Font name”

Variable (‎STRING‎). Includes the font of the text.

Example: ‎PLC_PRG.stFontVar := 'Arial';‎

The selection of fonts corresponds to the default “Font” dialog.

“Size”

Variable (numeric data type). Contains the font size (in pixels or points). The applied unit is specified in brackets after the variable name.

  • <pt>: Points (default)

    Example: ‎PLC_PRG.iFontHeight <pt>‎

    Code: ‎iFontHeight : INT := 12;‎

  • <px> : Pixels

    Example: ‎PLC_PRG.iFontHeight <px>‎

    Code: ‎iFontHeight : INT := 19;‎

_cds_img_dropdownlist_unit_font_size

If you click in the value field, a drop-down list opens on the right for setting the unit.

Hint: The font size is specified in points (example: Arial 12). Use points when the variable font size should match a font, for example if a font is set in the property “Text property  Font”.

“Flags”

Variable (‎DWORD‎). Contains the flags for displaying fonts.

Flags:

  • ‎1‎: Italics

  • ‎ 2‎: Bold

  • ‎4‎: Underline

  • ‎8‎: Strikethrough

Note: You can combine the font displays by adding the coding of the flags. For example, a bold and underlined text: ‎PLC_PRG.dwFontType := 6;‎

“Character set”

Variable (‎DWORD‎). Contains a character set number for the font.

The selection of character set numbers corresponds to the “Script” setting of the standard “Font” dialog.

“Color”

Variable (‎DWORD‎). Includes the color of the text.

Example: ‎PLC_PRG.dwColorFont:= 16#FF000000;‎

“Flags for text alignment”

Variable (integer data type). Contains the coding for text alignment.

Example: ‎PLC_PRG.dwTextAlignment‎.

Coding:

  • ‎0‎: Top left

  • ‎1‎: Horizontal center

  • ‎2‎: Right

  • ‎4‎: Vertical center

  • ‎8‎: Bottom

Note: You can combine the text alignments by adding the coding of the flags. For example, a vertical and horizontal centered text: ‎PLC_PRG.dwFontType := 5;‎

Fixed values for displaying texts are set in “Text properties”.

Element property 'Color variables'

The Element property is used as an interface for project variables to dynamically control colors at runtime.

“Toggle color”

The property controls the toggled color at runtime.

Value assignment:

  • ‎FALSE‎: The element is displayed with the color specified in the “Color” property.

  • ‎TRUE‎: The element is displayed with the color specified in the “Alarm color” property.

Assignment options:

  • Placeholder for the user input variable

    • “<toggle/tap variable>”

    • “<NOT toggle/tap variable>”

    The color change is not controlled by its own variable, but by a user input variable.

    Note: Specify a variable for the mouse events “Tap” or “Toggle” in the input configuration of the element. Only then is the placeholder set. If you configure a variable in both “Toggle” and “Tap”, then the variable specified in “Tap” is used.

    Hint: Click the symbol _visu_icon_linked_variable to insert the placeholder “<toggle/tap variable>”. When you activate the “Inputconfiguration”, “Tap FALSE” property, then the “<NOT toggle/tap variable>” placeholder is displayed.

  • Instance path of a project variable (‎BOOL‎)

    Example: ‎PLC_PRG.xColorIsToggeled‎

    Note: In the code, declare and implement the variable specified here. Its value assignment determines when the color changes.

“Normal state”

“Alarm state”

The properties listed below control the color depending on the state. The normal state is in effect if the variable in “Color variables”, “Toggle color” is not defined or it has the value ‎FALSE‎. The alarm state is in effect if the variable in “Colorvariables”, “Toggle color” has the value ‎TRUE‎.

“Frame color”

Assignment options:

  • Variable (‎DWORD‎) for the frame color

    Example: ‎PLC_PRG.dwBorderColor‎

  • Color literal

    Example of green and opaque: ‎16#FF00FF00‎

“Filling color”

Assignment options:

  • Variable (‎DWORD‎) for the fill color

    Example: ‎PLC_PRG.dwFillColor‎

  • Color literal

    Example of gray and opaque: ‎16#FF888888‎

The transparency part of the color value is evaluated only if the “Activate semi-transparent drawing” option of the visualization manager is selected.

Select the “Advanced” option in the toolbar of the properties view. Then all element properties are visible.

Element property 'Appearance variables'

The properties contain IEC variables for controlling the appearance of the element dynamically.

“Line width”

Variable (integer data type). Contains the line weight (in pixels).

“Fill attributes”

Variable (DWORD). Controls whether the fill color of the element is visible.

  • Variable value ‎= 0‎: Filled

  • Variable value ‎> 0‎: Invisible; no fill color

“Line style”

Variable (DWORD). Controls the line style.

Coding:

  • ‎0‎: Solid line

  • ‎1‎: Dashed line

  • ‎2‎: Dotted line

  • ‎3‎: Line type "Dash Dot"

  • ‎3‎: Line type "Dash Dot Dot"

  • ‎8‎: Invisible; no line

Fixed values can be set in the “Appearance” property. These values can be overwritten by dynamic variables at runtime.

Element property 'State variables'

The variables control the element behavior dynamically.

“Invisible”

Variable (‎BOOL‎). Toggles the visibility of the element.

‎TRUE‎: The element is not visible at runtime.

Example: ‎bIsVisible‎ with ‎VAR bIsVisible : BOOL := FALSE; END_VAR‎

“Deactivate inputs”

Variable (‎BOOL‎). Toggles the operability of the element.

‎TRUE‎: User inputs do not have any effect in runtime more. The element is shown as deactivated.

The “Invisible” property is supported by the "Client Animation" functionality.

These properties are available only when you have selected the “Support client animations and overlay of native elements” option in the Visualization Manager.

“Animation duration”

Defines the duration (in milliseconds) in which the element runs an animation

  • Variable (‎integer value‎)

    Example: ‎Menu.tContent‎ with ‎VAR tContent : INT := 500; END_VAR‎

  • Integer literal

    Example: ‎500‎

Animatable properties

  • “Absolute movement”, “Movement”, “X”, “Y”

  • “Absolute movement”, “Rotation”

  • “Absolute movement”, “Interior rotation”

  • “Absolute movement”, “Exterior rotation”

The animated movement is executed when at least one value of an animatable property has changed. The movement then executed is not jerky, but is smooth within the specified animation duration. The visualization element travels to the specified position while rotating dynamically. The transitions are smooth.

“Move to foreground”

Moves the visualization element to the foreground

Variable (‎BOOL‎)

Example: ‎bIsInForeground‎ with ‎VAR bIsInForeground : BOOL := FALSE; END_VAR‎

‎TRUE‎: At runtime, the visualization element is displayed in the foreground.

‎FALSE‎: At runtime, the visualization element is displayed in the layer where it was inserted in the visualization editor.

Element property 'Input configuration'

The properties contain the configurations for the user input when using the mouse or keyboard. A user input defines an event and one or more actions that are executed when an event occurs.

The “Configure” button opens the “Input Configuration” dialog. There you can create or edit user inputs.

Configured user inputs are listed below the events. They each include the action that is triggered and the setting in short form.

Example: “Execute ST Code”: _visu_icon_action‎PLC_PRG.i_x := 0;‎

“OnDialogClosed”

Input event: The user closes the dialog.

“OnMouseClick”

Input event: The user clicks the mouse button completely in the element area. The mouse button is clicked and released.

“OnMouseDown”

Input event: The user clicks down on the mouse button.

“OnMouseEnter”

Input event: The user drags the mouse pointer to the element.

“OnMouseLeave”

Input event: The user drags the mouse pointer away from the element.

“OnMouseMove”

Input event: The user moves the mouse pointer over the element area.

“OnMouseUp”

Input events:

  • The user releases the mouse button within the element area. It is irrelevant whether the user has previously pressed the mouse button inside or outside the element area.

  • The user presses the mouse button within the element area, leaves the element area, and then releases the mouse button.

Note: This CODESYS-specific triggering behavior guarantees that actions for key elements are completed. A key element starts an action for “OnMouseDown” and ends the action for “OnMouseUp”.

Example: A visualization user presses the mouse button within the element area of the key element and then moves the cursor position so that it lies outside the element area. The action is ended anyway because “OnMouseUp” is triggered.

“Tap”

When a mouse click event occurs, the variable defined in “Variable” is described in the application. The coding depends on the “Tap FALSE” and “Tap on enter if captured” options.

“Variable”

Variable (‎BOOL‎) that is set on mouse click event.

Example: ‎PLC_PRG.bIsTapped‎

‎TRUE‎: A mouse click event exists. It lasts as long as the user presses the mouse button over the element. It ends when the button is released.

‎FALSE‎: A mouse click event does not exist.

Requirement: The “Tap FALSE” option is not activated.

“Tap FALSE”

_cds_icon_option_activated: The mouse click event leads to a complementary value in “Variable”.

‎TRUE‎: A mouse click event does not exist.

‎FALSE‎: While the mouse click event exists.

“Tap on enter if captured”

_cds_icon_option_activated: During user input, it is also taken into consideration whether the mouse pointer is dragged within the element area or not while the mouse button is pressed.

‎TRUE‎: While the mouse click event exists and the mouse pointer is moved over the element area.

‎FALSE‎: A mouse click event does not exist. Or the user moves the mouse pointer outside of the element area while the mouse button is pressed.

The value is ‎TRUE‎ again as soon as the user moves the pointer back to the element area. The mouse is then captured.

“Toggle”

With the onset of a mouse click event, the variable is set; when the mouse click event is completed, the variable is reset.

“Variable”

Variable (‎BOOL‎). Its value toggled when the mouse click event is ended. This is when the user releases the mouse button while the mouse pointer is over the element area.

If the user releases the mouse button while the mouse pointer is outside of the element area, then the mouse click event is not ended and the value is not toggled.

Hint: The user can cancel a started toggle input by dragging the mouse pointer out of the element area.

“Toggle on up if captured”

_cds_icon_option_activated: The value toggles regardless of where the mouse pointer is when the mouse button is released. The mouse is then captured.

“Hotkey”

Keyboard shortcut on the element for triggering specific input actions.

When the keyboard shortcut event occurs, the input actions in the “Events” property are triggered. In this way, it is not the input action itself that leads to this input action, but the mouse input action.

“Key”

Key pressed for input action.

Example: [T]

Note: The following properties appear when a key is selected.

“Events”

  • “None”

  • “Mouse down”: Pressing the key triggers the input actions that are configured in the “OnMouseDown” property.

  • “Mouse up”: Releasing the key triggers the input actions that are configured in the “OnMouseUp” property.

  • “Mouse down/up”: Pressing and releasing the key triggers the input actions that are configured in the “OnMouseDown” property and the “OnMouseUp” property.

“Shift”

_cds_icon_option_activated: Combination with the Shift key

Example: [Shift]+[T].

“Control”

_cds_icon_option_activated: Combination with the Ctrl key

Example: [Ctrl]+[T].

“Alt”

_cds_icon_option_activated: Combination with the Alt key

Example: [Alt]+[T].

All keyboard shortcuts and their actions that are configured in the visualization are listed on the “Keyboard Configuration” tab.

Element property 'Access rights'

Requirement: User management is set up for the visualization.

“Access rights”

Opens the “Access rights” dialog. There you can edit the access privileges for the element.

Status messages:

  • “Not set. Full rights.”: Access rights for all user groups : “operable”

  • “Rights are set: Limited rights”: Access is restricted for at least one group.