dl-breadcrumbs__homedl-breadcrumb-item__separatorConfiguration and programmingdl-breadcrumb-item__separatorProgramming with CODESYSdl-breadcrumb-item__separator...dl-breadcrumb-item__separatorCODESYS Visualizationdl-breadcrumb-item__separatorReference: User Interface dl-breadcrumb-item__separatorObjects dl-breadcrumb-item__separatorObject: Remote Alarms
dl-pagination__prev-inactivedl-pagination__prev-activedl-pagination__next-inactivedl-pagination__next-active
Object: Remote Alarms dl-permalink__symbolPermalink

The object manages the remote alarm classes and groups.

For alarm management, this means that monitoring and alarm triggering is done on the remote PLCs. The local alarm management communicates with the remote PLCs via a data source management (over a proxy server) and therefore recognizes the remote alarms. Then a visualization that is connected to the local alarm management can display remote alarms. The user can operate and acknowledge the alarms.

“Update”

Opens the “Update Alarm Classes and Groups” dialog described below.

“Alarm Groups / Classes”

Hierarchical representation of the alarm data of remote devices with their applications, alarm groups, and classes. The remote devices are connected via the data source management.

“Map to Local”

List with an blank entry and the alarm classes of the local alarm configuration

  • Blank entry: The remote display options of the remote alarm class are used.

  • <local alarm class>: The display options of the local alarm class are used.

    Example: ‎Error‎

_cds_img_hmi_alarm_configuration.png: Display options were specified (among other criteria) in the definition of an alarm class. Here you can specify whether the display options set in the remote alarm configuration or the display options of the local alarm configuration are applied. The display options are required in the visualization of the “Alarm Table” or “Alarm Banner” elements.

  • Dialog: Update Alarm Classes and Groups