|
PROFINET remote I/O |
|
|---|---|
|
I/O module on TU5xx-H connected to I/O bus master |
CI501-PNIO or CI502-PNIO |
|
Required version of I/O bus master |
Module index as of F0 Firmware as of V3.2.10 |
|
Fieldbus master when used as remote I/O with AC500 V3 |
Not supported |
|
When used as remote I/O on third party controller (PLC or DCS) |
Note: alarms must be acknowledged by fieldbus master. The corresponding GSDML file is needed for the full scope of the vendor specific diagnosis.
|