dl-breadcrumbs__homedl-breadcrumb-item__separatorConfiguration and programmingdl-breadcrumb-item__separatorConfiguration in Automation Builderdl-breadcrumb-item__separatorPLC devices and componentsdl-breadcrumb-item__separator...dl-breadcrumb-item__separatorPROFINET IO Configuratordl-breadcrumb-item__separatorPROFINET IO controllerdl-breadcrumb-item__separatorConfiguration dl-breadcrumb-item__separatorDevice – Port Data
dl-pagination__prev-inactivedl-pagination__prev-activedl-pagination__next-inactivedl-pagination__next-active
Device – Port Data dl-permalink__symbolPermalink

Object: PROFINET Device

On the tab, you define the port configuration as well as the neighboring devices and the connection cable

“Shared device”

_cds_icon_option_activated_copy.png: This device is configured by another controller. Modules that are used by the other controller must be deactivated by setting this option.

“Peer station/port”

Neighboring device with port that is connected to this port

You can accept this setting on the “ PROFINET Controller Topology” tab.

“Cable length”

Length of the network cable (in meters)

  • < 10

  • < 25

  • < 50

  • < 100

When the cable length is specified, it is checked when the controller is powered up. An incorrect cable length causes an error message.

“MAU type”

Type of network cable

  • Copper

  • Fiber optic

When the cable type is specified, it is checked when the controller is powered up. An incorrect cable type causes an error message.