Go to start pageConfiguration and programmingDiagnosis and debugging...The diagnosis system Diagnosis in IEC applicationData types in library AC500_DiagTypesEnumeration teHwId
Enumeration teHwIdPermalink

The enumeration teHwId specifies the hardware component as location of a diagnosis message.

Name

Initial

Comment

eDiagHwId_CPU

0

Any diagnosis message regarding CPU itself, like "battery", "sd card", etc.

eDiagHwId_Coupler1

1

Any diagnosis message regarding communication module at slot 1. May be indicated by any corresponding communication module driver (instance) or a protocol driver (instance)

eDiagHwId_Coupler2

2

Any diagnosis message regarding communication module at slot 2. May be indicated by any corresponding communication module driver (instance) or a protocol driver (instance)

eDiagHwId_Coupler3

3

Any diagnosis message regarding communication module at slot 3. May be indicated by any corresponding communication module driver (instance) or a protocol driver (instance)

eDiagHwId_Coupler4

4

Any diagnosis message regarding communication module at slot 4. May be indicated by any corresponding communication module driver (instance) or a protocol driver (instance)

eDiagHwId_Coupler5

5

Any diagnosis message regarding communication module at slot 5. May be indicated by any corresponding communication module driver (instance) or a protocol driver (instance)

eDiagHwId_Coupler6

6

Any diagnosis message regarding communication module at slot 6. May be indicated by any corresponding communication module driver (instance) or a protocol driver (instance)

eDiagHwId_COM1

7

Any diagnosis message regarding COM1. May be indicated by any corresponding interface driver (instance) or a protocol driver (instance)

eDiagHwId_COM2

8

Any diagnosis message regarding COM2. May be indicated by any corresponding interface driver (instance) or a protocol driver (instance)

eDiagHwId_CAN

9

Any diagnosis message regarding CAN interface. May be indicated by any corresponding interface driver (instance) or a protocol driver (instance)

eDiagHwId_OnboardIO

10

Onboard I/O, AC500-eCo only

eDiagHwId_OptionBoard1

11

Option board 1, AC500-eCo only

eDiagHwId_OptionBoard2

12

Option board 2, AC500-eCo only

eDiagHwId_OptionBoard3

13

Option board 3, AC500-eCo only

eDiagHwId_IOBus

14

I/O bus

eDiagHwId_ETH1

15

Any diagnosis message regarding ETH1. May be indicated by any corresponding interface driver (instance) or a protocol driver (instance)

eDiagHwId_ETH2

16

Any diagnosis message regarding ETH2. May be indicated by any corresponding interface driver (instance) or a protocol driver (instance)

The hardware ID HwId is only used for diagnosis output in CPU display to identify the location of a diagnosis message⮫ “Diagnosis in CPU display”.