dl-breadcrumbs__homedl-breadcrumb-item__separatorConfiguration and programmingdl-breadcrumb-item__separatorConfiguration in Automation Builderdl-breadcrumb-item__separator...dl-breadcrumb-item__separatorPLC devices and componentsdl-breadcrumb-item__separatorEtherCAT configurator dl-breadcrumb-item__separatorConfiguration dl-breadcrumb-item__separatorTab: EtherCAT Slave – Process Data
dl-pagination__prev-inactivedl-pagination__prev-activedl-pagination__next-inactivedl-pagination__next-active
Tab: EtherCAT Slave – Process Data dl-permalink__symbolPermalink

The tab displays the process data for the inputs and outputs of the slave. The data is preset from the device description file.

Table 443: Select the Outputs

The table shows the outputs of the slave defined by “Start address”, “Type”, and “Index”.

If outputs of the device are enabled here (for writing), then these outputs can be assigned to project variables in the “EtherCAT I/O Mapping” dialog.

Table 444: Select the Inputs

The table shows the inputs of the slave defined by “Name”, “Type”, and “Index”.

If inputs of the device are enabled here (for reading), then these inputs can be assigned to project variables in the “EtherCAT I/O Mapping” dialog.