dl-breadcrumbs__homedl-breadcrumb-item__separatorConfiguration and programmingdl-breadcrumb-item__separatorProgramming with CODESYSdl-breadcrumb-item__separatorAutomation Builderdl-breadcrumb-item__separator...dl-breadcrumb-item__separatorReference: User Interface dl-breadcrumb-item__separatorMenu Commands dl-breadcrumb-item__separatorOnline dl-breadcrumb-item__separatorCommand: Reset Origin
dl-pagination__prev-inactivedl-pagination__prev-activedl-pagination__next-inactivedl-pagination__next-active
Command: Reset Origin dl-permalink__symbolPermalink

Function: The command triggers a reset origin of the active application on the controller.

Call: “Online” menu

Requirement: The application is in online mode.

NOTICE

NOTICE
NOTICE
NOTICE

NOTICE

NOTICE

If a safety controller is inserted below a controller, then this command can interrupt the communication connections permanently.

Connections of the safety controller to other safety controllers (via safety network variables), to field devices, and to the development system are affected. The safe field devices or other safety controllers can enter the safe state as a reaction. The connection to the development system is affected only when a safety controller that is connected to the main controller via a fieldbus.

For more information, see:

After restarting with “Reset Origin”, the following happens:

  • The application code is deleted, and as a result the application has no state.

  • Variables are deleted, and the values are lost.

  • Retain variables are deleted, and the values are lost.

  • Persistent variables are deleted, and the values are lost.

  • Breakpoints that were set in the code are lost.

For more information, see: ⮫ “Preserving Data with Persistent Variables ”