ERROR_ID (ENUM)

TYPE ERROR_ID

Attributes:

qualified_only

InOut:

Name	Initial	Comment
NO_ERROR	16#0	No error
ERR_VALUE_INVALID	16#1	At least one field of the value is not supported
ERR_VALUE_TOO_LOW	16#2	Value is less than “LowerLimit” of weight specified
ERR_VALUE_TOO_HIGH	16#3	Value is greater than “UpperLimit” of weight specified
ERR_PARAMETER_ERROR	16#4	Value of parameter is invalid or not supported by module
ERR_FUNCTION_CODE	16#5	Function code is not supported by module
ERR_FAILURE	16#6	Failure to obtain the measurement
ERR_OVERRUN	16#7	The previous value is overwritten by new measurement before fetching when ower sampling rate is faster than cycletime of task
ERR_OCCUPY_CHANNEL	16#8	The same strain gauge input channel has been called and executed by function block
ERR_EXCITATION	16#9	Excitation malfunction
ERROR_WRONG_ADDRESS	16#A	Invalid channel address, the address must not be 0
ERR_BROKEN_WIRE	16#80	Broken wire of external connection
ERROR_SHORT_CIRCUIT	16#81	Short circuit of external connection
ERR_CHANNEL_OVERFLOW	16#82	Overflow of input signal
ERROR_CHANNEL_UNDERFLOW	16#83	Underflow of input signal
ERR_LOW_VOLTAGE	16#84	Voltage is too low to operate
ERROR_PARAMETER_RANGE	16#85	Invalid parameter, value is out of the range specified
ERR_PARAMETER_CRC	16#86	Invalid parameter block due to CRC error detected
ERROR_HARDWARE_ADC	16#87	ADC hardware malfunction
ERR_HARDWARE_REFERENCE	16#88	Internal reference voltage malfunction
ERROR_HARDWARE_COMMUNICATION	16#89	Internal communication error