dl-breadcrumbs__homedl-breadcrumb-item__separatorHardware descriptionsdl-breadcrumb-item__separatorDevice specificationsdl-breadcrumb-item__separator...dl-breadcrumb-item__separatorProcessor modulesdl-breadcrumb-item__separatorAC500 and AC500-XCdl-breadcrumb-item__separatorPM5630, PM5650, PM5670, PM5675dl-breadcrumb-item__separatorOrdering data
dl-pagination__prev-inactivedl-pagination__prev-activedl-pagination__next-inactivedl-pagination__next-active
Ordering datadl-permalink__symbolPermalink

Processor modules

To enable better product availability into the production and to provide some new features, a revision 3 of the existing AC500 processor module was necessary. The existing processor module revision 2 with rubric R0278 will move to classic and will be replaced by compatible new processor module revision 3 with rubric R0378.

For example:

The processor module revision 3 PM5630-2ETH (1SAP131 000 R0378) replaces the existing processor module revision 2 PM5630-2ETH (1SAP 131 000 R0278) and provides the same features or functionality of the previous ones.

Following points must be considered with the processor module revision 3:

  • The processor module revision 3 (R037x) requires a new BootFW / CPUFW from V3.6.x and higher.

  • It cannot be downgraded and used with lower FW versions than V3.6.0.

  • The processor module revision 3 (R037x) provides the same features as the processor module revision 2 (R027x) existing today and is fully compatible.

  • An existing application using a processor module revision 2 (R027x) built with Automation Builder < 2.6 can run on a processor module revision 3 (R037x) but the application must be upgraded to at least AB 2.6.0 or higher.

What must be done using a new processor module revision 3 (R037x)?

  • On a new application?

    • Just use the new processor module revision 3 (R037x)

    • Use the latest Automation Builder software from 2.6.0 or higher.

  • On an existing application using an Automation Builder software version smaller than 2.6.0?

    • To use a new processor module revision 3 in an existing application (e.g., replacement of the processor module revision 2), the application must be upgraded to at least AB 2.6.0 or higher.

    • If several processor module (revision 3 and revision 2) are used within the same project, all the processor modules used in the same application must be upgraded to the FW Version V3.6.x and higher.

Table 119: Processor modules for AC500 (Standard)

Part no.

Description

Product life cycle phase *)

1SAP 131 000 R0278

(processor module revision 2)

PM5630-2ETH, processor module, memory 8 MB, 24 V DC, memory card slot, interface 1 RS-232/485, display, 2 RJ45 independent onboard Ethernet TCP/IP interfaces with Modbus TCP, web server, IEC60870-5-104 or selectable Ethernet based protocols

Classic

(replaced by processor module revision 3)

1SAP 131 000 R0378

(processor module revision 3)

PM5630-2ETH, processor module, memory 8 MB, 24 V DC, memory card slot, interface 1 RS-232/485, display, 2 RJ45 independent onboard Ethernet TCP/IP interfaces with Modbus TCP, web server, IEC60870-5-104 or selectable Ethernet based protocols

Active

1SAP 331 000 R0278

(processor module revision 2)

PM5630-2ETH-XC, processor module, memory 8 MB, 24 V DC, memory card slot, interface 1 RS-232/485, display, 2 RJ45 independent onboard Ethernet TCP/IP interfaces with Modbus TCP, web server, IEC60870-5-104 or selectable Ethernet based protocols, XC version

Classic

(replaced by processor module revision 3)

1SAP 331 000 R0378

(processor module revision 3)

PM5630-2ETH-XC, processor module, memory 8 MB, 24 V DC, memory card slot, interface 1 RS-232/485, display, 2 RJ45 independent onboard Ethernet TCP/IP interfaces with Modbus TCP, web server, IEC60870-5-104 or selectable Ethernet based protocols, XC version

Active

1SAP 141 000 R0278

(processor module revision 2)

PM5650-2ETH, processor module, memory 80 MB, 24 V DC, memory card slot, interface 1 RS-232/485, display, 2 RJ45 independent onboard Ethernet TCP/IP interfaces with Modbus TCP, web server, IEC60870-5-104 or selectable Ethernet based protocols

Classic

(replaced by processor module revision 3)

1SAP 141 000 R0378

(processor module revision 3)

PM5650-2ETH, processor module, memory 80 MB, 24 V DC, memory card slot, interface 1 RS-232/485, display, 2 RJ45 independent onboard Ethernet TCP/IP interfaces with Modbus TCP, web server, IEC60870-5-104 or selectable Ethernet based protocols

Active

1SAP 341 000 R0278

(processor module revision 2)

PM5650-2ETH-XC, processor module, memory 80 MB, 24 V DC, memory card slot, interface 1 RS-232/485, display, 2 RJ45 independent onboard Ethernet TCP/IP interfaces with Modbus TCP, web server, IEC60870-5-104 or selectable Ethernet based protocols, XC version

Classic

(replaced by processor module revision 3)

1SAP 341 000 R0378

(processor module revision 3)

PM5650-2ETH-XC, processor module, memory 80 MB, 24 V DC, memory card slot, interface 1 RS-232/485, display, 2 RJ45 independent onboard Ethernet TCP/IP interfaces with Modbus TCP, web server, IEC60870-5-104 or selectable Ethernet based protocols, XC version

Active

1SAP 151 000 R0278

(processor module revision 2)

PM5670-2ETH, processor module, memory 160 MB, 24 V DC, memory card slot, interface 1 RS-232/485, display, 2 RJ45 independent onboard Ethernet TCP/IP interfaces with Modbus TCP, web server, IEC60870-5-104 or selectable Ethernet based protocols

Classic

(replaced by processor module revision 3)

1SAP 151 000 R0378

(processor module revision 3)

PM5670-2ETH, processor module, memory 160 MB, 24 V DC, memory card slot, interface 1 RS-232/485, display, 2 RJ45 independent onboard Ethernet TCP/IP interfaces with Modbus TCP, web server, IEC60870-5-104 or selectable Ethernet based protocols

Active

1SAP 351 000 R0278

(processor module revision 2)

PM5670-2ETH-XC, processor module, memory 160 MB, 24 V DC, memory card slot, interface 1 RS-232/485, display, 2 RJ45 independent onboard Ethernet TCP/IP interfaces with Modbus TCP, web server, IEC60870-5-104 or selectable Ethernet based protocols, XC version

Classic

(replaced by processor module revision 3)

1SAP 351 000 R0378

(processor module revision 3)

PM5670-2ETH-XC, processor module, memory 160 MB, 24 V DC, memory card slot, interface 1 RS-232/485, display, 2 RJ45 independent onboard Ethernet TCP/IP interfaces with Modbus TCP, web server, IEC60870-5-104 or selectable Ethernet based protocols, XC version

Active

1SAP 151 500 R0278

(processor module revision 2)

PM5675-2ETH, processor module, memory 160 MB, 8 GB flash disk, 24 V DC, memory card slot, interface 1 RS-232/485, display, 2 RJ45 independent onboard Ethernet TCP/IP interfaces with Modbus TCP, web server, IEC60870-5-104 or selectable Ethernet based protocols

Classic

(replaced by processor module revision 3)

1SAP 151 500 R0378

(processor module revision 3)

PM5675-2ETH, processor module, memory 160 MB, 8 GB flash disk, 24 V DC, memory card slot, interface 1 RS-232/485, display, 2 RJ45 independent onboard Ethernet TCP/IP interfaces with Modbus TCP, web server, IEC60870-5-104 or selectable Ethernet based protocols

Active

1SAP 351 500 R0278

(processor module revision 2)

PM5675-2ETH-XC, processor module, memory 160 MB, 8 GB flash disk, 24 V DC, memory card slot, interface 1 RS-232/485, display, 2 RJ45 independent onboard Ethernet TCP/IP interfaces with Modbus TCP, web server, IEC60870-5-104 or selectable Ethernet based protocols, XC version

Classic

(replaced by processor module revision 3)

1SAP 351 500 R0378

(processor module revision 3)

PM5675-2ETH-XC, processor module, memory 160 MB, 8 GB flash disk, 24 V DC, memory card slot, interface 1 RS-232/485, display, 2 RJ45 independent onboard Ethernet TCP/IP interfaces with Modbus TCP, web server, IEC60870-5-104 or selectable Ethernet based protocols, XC version

Active

1SAP 131 000 R0379

PM5630-MC-KIT: AC500, Machine Controller Kit with PM5630-2ETH, CM579-ETHCAT, TB5610-ETH, PS5611-MC

Active

1SAP 141 000 R0379

PM5650-MC-KIT: AC500, Machine Controller Kit with PM5650-2ETH, CM579-ETHCAT, TB5610-ETH, PS5611-MC

Active

1SAP 151 000 R0379

PM5670-MC-KIT: AC500, Machine Controller Kit with PM5670-2ETH, CM579-ETHCAT, TB5610-ETH, PS5611-MC

Active

Required accessories

1SAP xxx 300 R0278

TB56xx, terminal base

⮫ “TB5600, TB5610, TB5620, TB5640, TB5660”

Active

Optional accessories

1SAP 180 300 R0001

TA521, lithium battery

⮫ “TA521 - Adapter cable with button cell”

Active

1SAP 180 100 R00xx

MC51xx, memory card

⮫ “MC5102 - Micro memory card with adapter”

⮫ “MC5141 - Memory card”

Active

*) Modules in lifecycle Classic are available from stock but not recommended for planning and commissioning of new installations.