dl-breadcrumbs__homedl-breadcrumb-item__separatorConfiguration and programmingdl-breadcrumb-item__separatorProgramming with CODESYSdl-breadcrumb-item__separator...dl-breadcrumb-item__separatorCODESYS Visualizationdl-breadcrumb-item__separatorReference, Programmingdl-breadcrumb-item__separatorVisualization Elementsdl-breadcrumb-item__separatorVisualization Element 'Busy Symbol, Flower'
dl-pagination__prev-inactivedl-pagination__prev-activedl-pagination__next-inactivedl-pagination__next-active
Visualization Element 'Busy Symbol, Flower'dl-permalink__symbolPermalink

Symbol:

_visu_img_waiting_flower

Category: “Special Controls”

The element indicates that the system is busy or waiting for data.

Element properties

“Element name”

Example: ‎Data_Transfer‎

Optional

Hint: Assign individual names for elements so that they are found faster in the element list.

“Type of element”

“Busy Symbol, Flower”

Element property 'Position'

The position defines the location and size of the element in the visualization window. These are based on the Cartesian coordinate system. The origin is located at the upper left corner of the window. The positive horizontal x-axis runs to the right. The positive vertical y-axis runs downwards.

“X”

X coordinate of the upper left corner of the element

Specified in pixels.

Example: ‎10‎.

“Y”

Y coordinate of the upper left corner of the element

Specified in pixels.

Example: ‎10‎.

“Width”

Specified in pixels.

Example: ‎150‎

“Height”

Specified in pixels.

Example: ‎30‎

You can also change the values by dragging the box symbols (_visu_icon_position_element) to other positions in the editor.

Element property 'Center'

The properties contain fixed values for the coordinates of the point of rotation. This point of rotation is shown as the _visu_icon_center_point.png symbol. The point is used as the center for rotating and scaling.

“X”

X-coordinate of the point of rotation

“Y”

Y-coordinate of the point of rotation

You can also change the values by dragging the symbols (_visu_icon_center_point.png) to other positions in the editor.

Element property 'Colors'

The properties contain fixed values for setting colors.

“Frame color”

“Fill color”

“Transparency”

Value (0 to 255) for defining the transparency of the selected color.

Example ‎255‎: The color is opaque. ‎0‎: The color is completely transparent.

Element property 'Appearance'

The properties contain fixed values for setting the look of the element.

“Line width”

Value in pixels

Example: ‎2‎

Note: The values ‎0‎ and ‎1‎ both result in a line weight of 1 pixel. If no line should be displayed, then the “Line style” property must be set to the option “Invisible”.

“Fill attributes”

The way in which the element is filled.

  • “Filled”:The element is filled with the color from property “Colors  Fill color”.

  • “Invisible”: The fill color is invisible.

“Line style”

Type of line representation

  • “Solid”

  • “Dashes”

  • “Dots”

  • “Dash Dot”

  • “Dash Dot Dot”

  • “not visible”

You can assign variables in the “Appearance variables” property for controlling the appearance dynamically. The fixed values here are overwritten.

“Symbol color”

Selection of a color for the flower symbol.

“Line”

Stroke width of the lines (in pixels).

Element property 'Absolute movement'

The properties contain IEC variables for controlling the position of the element dynamically. The reference point is the upper left corner of the element. In runtime mode, the entire element is moved.

“Movement”

“X”

Variable (numeric data type). Defines the X position (in pixels).

Example: ‎PLC_PRG.iPos_X‎.

Increasing this value in runtime mode moves the element to the right.

“Y”

Variable (numeric data type). Defines the Y position (in pixels).

Example: ‎PLC_PRG.iPos_Y‎.

Increasing this value in runtime mode moves the element downwards.

“Rotation”

Variable (numeric data type). Defines the angle of rotation (in degrees).

Example: ‎PLC_PRG.iAngle1‎.

The midpoint of the element rotates at the “Center” point. This rotation point is shown as the _visu_icon_center_point.png symbol.

In runtime mode, the alignment of the element remains the same with respect to the coordinate system of the visualization. Increasing the value rotates the element to the right.

 _visu_img_prp_rotation

“Interior rotation”

Variable (numeric data type). Defines the angle of rotation (in degrees).

Example: ‎PLC_PRG.iAngle2‎.

In runtime mode, the element rotates about the point of rotation specified in “Center” according to the value of the variable. In addition, the alignment of the element rotates according to the coordinate system of the visualization. Increasing the value in the code rotates clockwise.

The rotation point is shown as the _visu_icon_center_point.png symbol.

Note: If a static angle of rotation is specified in the “Position  Angle” property, then the static angle of rotation is added to the variable angle of rotation (offset) when the visualization is executed.

 _visu_img_prp_inner_rotation

You can link the variables to a unit conversion.

The “X”, “Y”, “Rotation”, and “Interior rotation” properties are supported by the "Client Animation" functionality.

See also

Element property 'State variables'

The variables control the element behavior dynamically.

“Invisible”

Variable (‎BOOL‎). Toggles the visibility of the element.

‎TRUE‎: The element is not visible at runtime.

The “Invisible” property is supported by the "Client Animation" functionality.

These properties are available only when you have selected the “Support client animations and overlay of native elements” option in the Visualization Manager.

“Animation duration”

Defines the duration (in milliseconds) in which the element runs an animation

  • Variable (‎integer value‎)

    Example: ‎Menu.tContent‎ with ‎VAR tContent : INT := 500; END_VAR‎

  • Integer literal

    Example: ‎500‎

Animatable properties

  • “Absolute movement”, “Movement”, “X”, “Y”

  • “Absolute movement”, “Rotation”

  • “Absolute movement”, “Interior rotation”

  • “Absolute movement”, “Exterior rotation”

The animated movement is executed when at least one value of an animatable property has changed. The movement then executed is not jerky, but is smooth within the specified animation duration. The visualization element travels to the specified position while rotating dynamically. The transitions are smooth.

“Move to foreground”

Moves the visualization element to the foreground

Variable (‎BOOL‎)

Example: ‎bIsInForeground‎ with ‎VAR bIsInForeground : BOOL := FALSE; END_VAR‎

‎TRUE‎: At runtime, the visualization element is displayed in the foreground.

‎FALSE‎: At runtime, the visualization element is displayed in the layer where it was inserted in the visualization editor.

Element property 'Access rights'

Requirement: User management is set up for the visualization.

“Access rights”

Opens the “Access rights” dialog. There you can edit the access privileges for the element.

Status messages:

  • “Not set. Full rights.”: Access rights for all user groups : “operable”

  • “Rights are set: Limited rights”: Access is restricted for at least one group.