dl-breadcrumbs__homedl-breadcrumb-item__separatorHardware descriptionsdl-breadcrumb-item__separatorDevice specificationsdl-breadcrumb-item__separatorI/O modulesdl-breadcrumb-item__separator...dl-breadcrumb-item__separatorAnalog I/O modulesdl-breadcrumb-item__separatorS500 and S500-XCdl-breadcrumb-item__separatorAO522 - Analog output moduledl-breadcrumb-item__separatorParameterization
dl-pagination__prev-inactivedl-pagination__prev-activedl-pagination__next-inactivedl-pagination__next-active
Parameterization

The module itself does not save any configuration data. It receives all parameters from the master device of the I/O bus (CPU or communication interface module) when the system is switched on.

If the external power supply voltage via UP/ZP terminals fails, the I/O module loses its configuration data. To reconfigure the module, the entire station must be switched off and on again.

Table 175: Parameters

Name

Default value

Values in menue

Ignore module

Yes

  • Yes

  • No

Check supply

On

  • On

  • Off

Behaviour of outputs at communication errors

Off

  • Off

  • Last value

  • Substitute value

  • Last value 5 s

  • Substitute value 5 s

  • Last value 10 s

  • Substitute value 10 s

Output x, substitute value

0

  • 0 ... 65535

Output x, channel configuration

Not used

  • Not used

  • -10 ... +10 V

  • 0 ... 20 mA

  • 4 ... 20 mA

Output x, check channel

Diagnosis (Plausib, Cut wire, Short circuit)

  • Diagnosis (Plausib, Cut wire, Short circuit)

  • Not used